Technical data: Spindle: 3.5kW air-cooledWorking surface X Y Z: 1300mm x 2500mm x 200mmSoftware: for CAD CAM design Artcam openProgram resolution: 0.01mmMechanical resolution: 0.04mmMax speed in slow runs: up to 33m minMax. work speed in the material: up to 25m minInverter: 3.7kW Dimensions of the machine: 3.08x2.03x1.95m Features: Hybrid table, i.e. 4-section vacuum T-GroovesThe frame of the machine is fully welded, relaxed and only milled - which ensures the accuracy of machining and work stabilityMachine control using the Mach3 system in Polish (requires a computer to be connected via USB)The tool height sensor is included in the setCentral oil lubrication system - for trolleys and guides on standard equipmentThe driving system is a high-performance eight-wire stepper motors controllerTransmission is carried out via a rack and slant - leveling playHelical drives with an open feedback loop. Rotation of 1.8 degrees, 4.2 A, 8 wire, 1.2 Ohms, 6.5mH inductance, holding torque 6N.m, Rot or inertia 2700 g-cm2The machine in all axes (X, Y, Z) moves on high-class HIWIN guides and linear bearingsDual hybrid stepper motor on both sides on the Y axisWiring the machine with high-class anti-fire cables. Electric wires used for milling machine construction are adapted to bending and are secured against deformationDrivers of stepper motors strong 860H - 4.